300-420 Archives - CiscoPrep https://www.ciscoprep.com/tag/300-420/ Cisco Career Updates Thu, 12 Nov 2026 10:08:11 +0000 en-US hourly 1 https://wordpress.org/?v=7.1.5 https://www.ciscoprep.com/wp-content/uploads/2021/12/cropped-CiscoPrep-Mini-Logo-32x32.png 300-420 Archives - CiscoPrep https://www.ciscoprep.com/tag/300-420/ 32 32 ENSLD Exam: How 300-420 Tests Design Choices, Not Commands https://www.ciscoprep.com/2026/11/12/ensld-exam-how-300-420-tests-design-choices-not-commands/ Thu, 12 Nov 2026 03:30:00 +0000 https://www.ciscoprep.com/?p=2204 Most of the 300-420 blueprint asks you to choose, not recall. A domain by domain read of the ENSLD exam through its verbs, the Automation domain naming puzzle, what a pass earns toward CCNP Enterprise, and a preparation order built for design questions.

The post ENSLD Exam: How 300-420 Tests Design Choices, Not Commands appeared first on CiscoPrep.

]]>

A retailer asks for four hundred branches on two transports, a campus that can be split by department without readdressing, voice that survives a link failure, and a migration path to IPv6 that does not stop the stores. Nobody in that conversation types a command. Someone has to decide which routing protocol, which overlay, which WAN service and which QoS model fit, and then defend the choice.

That person is who the ENSLD exam is written for. Cisco’s 300-420 ENSLD, Designing Cisco Enterprise Networks, lists 27 numbered objectives, and 15 of them open with a verb that asks you to decide something: create, design, determine or select. This article walks the five domains through that lens, explains the version and naming confusion around the blueprint, sets out what a pass earns, and ends with a preparation order built for a design exam rather than a configuration exam.

Table of Contents

  1. What Does the ENSLD Exam Actually Test?
  2. Why Do the Verbs in the 300-420 Blueprint Matter?
  3. What Sits in Advanced Addressing and Routing at 25 Percent?
  4. How Does the Campus Domain Mix Classic Design With SD-Access?
  5. Which WAN Design Choices Does 300-420 Expect You to Make?
  6. What Do QoS, Management and Multicast Look Like as Design Questions?
  7. Is There Really AI in the ENSLD Automation Domain?
  8. What Does Passing 300-420 Earn You?
  9. How Should You Prepare for a Design Exam?
  10. Frequently Asked Questions
  11. Conclusion

What Does the ENSLD Exam Actually Test?

The ENSLD exam tests enterprise network design across five domains: Advanced Addressing and Routing Solutions and Advanced Enterprise Campus Networks at 25 percent each, WAN for Enterprise Networks and Network Services at 20 percent each, and Automation at 10 percent. Exam 300-420 runs 90 minutes, carries 55 to 65 questions, and costs $300 USD at Pearson VUE.

The figures below come from the NWExam syllabus page for 300-420. Cisco’s own exam page confirms the name, the 90 minute duration and the fee, and adds the two delivery languages. It does not display a question count or a passing score, so those two rows rest on the syllabus page alone.

300-420 ENSLD exam fact Value
Exam name Designing Cisco Enterprise Networks
Exam code 300-420 ENSLD
Blueprint version v1.1
Number of questions 55 to 65
Duration 90 minutes
Exam fee $300 USD, or Cisco Learning Credits
Passing score Variable, approximately 750 to 850 out of 1000
Languages English, Japanese
Registration Pearson VUE
Domain Weight Numbered objectives
Advanced Addressing and Routing Solutions 25% 6
Advanced Enterprise Campus Networks 25% 5
WAN for Enterprise Networks 20% 5
Network Services 20% 5
Automation and Artificial Intelligence 10% 6

Half the exam sits in the first two domains, which is where routing and campus experience pays off. The last domain is the smallest by weight but carries six objectives, the joint highest count, so it is broad and shallow rather than easy to skip.

Why Do the Verbs in the 300-420 Blueprint Matter?

The verbs in the 300-420 blueprint tell you what kind of answer each objective expects. Fifteen of the 27 objectives use create, design, determine or select, which means choosing between options against a requirement. The other twelve use describe or differentiate, which means knowing how something works. ENSLD therefore rewards judgement more than recall, and studying it like a configuration exam misses the point.

300-420 ENSLD exam objectives split into 15 decide objectives and 12 describe objectives

Read the full 300-420 syllabus with that split in mind and the shape of the exam becomes clear. Every routing protocol objective is a design objective. Every SD-Access and SD-WAN objective is a describe objective. The decision work concentrates on classic routing, campus, VPN, WAN resilience, QoS and multicast, while the newer architectures are tested for understanding rather than for design trade-offs.

What a decision objective looks like in practice

A describe objective can be answered by recalling a fact: what the SD-Access control plane does, or which planes Cisco SD-WAN separates. A design objective gives you a set of constraints, such as a merger that brings a second routing domain, a site that must stay up through a single carrier outage, or a campus that needs segmentation without a forklift, and asks which option meets all of them. The wrong answers are usually valid technologies used in the wrong place.

Why the official course leans the same way

Cisco’s ENSLD training overview repeats the phrase “based on customer requirements” in its objectives for routing, BGP, LAN, SD-Access, WAN, QoS and IPv6, and every one of its six labs is a design lab rather than a configuration lab. The course and the exam point the same way: start from what the business asked for and work back to the technology.

What Sits in Advanced Addressing and Routing at 25 Percent?

Advanced Addressing and Routing Solutions carries 25 percent of the ENSLD exam and six objectives. You create structured IPv4 and IPv6 addressing plans, create stable, secure and scalable routing designs for IS-IS, EIGRP, OSPF and BGP, and determine an IPv6 migration strategy. It is the most decision-heavy domain on the blueprint: all six objectives ask you to create or determine something.

Addressing plans

Structured addressing is the foundation every later objective depends on. Summarization, route filtering, segmentation and security policy are all easier when the address plan follows the topology and the organisation. Expect to reason about where hierarchy belongs, how much space each block needs to grow, and how an IPv6 plan differs from simply mirroring the IPv4 one.

Interior and exterior routing

The IS-IS, EIGRP and OSPF objectives share the same wording: stable, secure and scalable. That is a hint about the questions. They ask where area or level boundaries go, how to limit the blast radius of a flap, and how to summarise without black-holing traffic. BGP gets five named sub-items on the syllabus page: address families, basic route filtering, attributes for path preference, route reflectors and confederations, and load sharing.

IPv6 migration

The migration objective lists three strategies: overlay through tunneling, native dual-stacking, and boundaries through IPv4 and IPv6 translation. Know when each fits. A network that must reach IPv6-only services through an IPv4 core needs something different from a campus that can run both stacks everywhere.

How Does the Campus Domain Mix Classic Design With SD-Access?

Advanced Enterprise Campus Networks is the second 25 percent domain on the ENSLD exam. Three of its five objectives are design objectives for high availability, Layer 2 infrastructure and multicampus Layer 3 infrastructure. The remaining two describe Cisco SD-Access architecture and fabric design considerations. Classic campus design is where you make choices; SD-Access is where you show you understand the model.

High availability and Layer 2

The high availability objective names first hop redundancy protocols, platform abstraction techniques, graceful restart with NSF and NSR, and BFD. The Layer 2 objective covers STP scalability, fast convergence, loop-free technologies, PoE and Wake on LAN, and Layer 2 security such as STP security, port security and VLAN access lists. The design question here is usually where the Layer 2 and Layer 3 boundary sits, which Cisco’s course treats as its own decision.

Multicampus Layer 3

Convergence, load sharing, route summarization, route filtering, VRFs, optimal topologies and redistribution make up the Layer 3 list. Redistribution and VRFs together are where merger and segmentation scenarios live, so practise drawing where routes cross between domains and what prevents loops when they do.

SD-Access

The SD-Access objectives cover the underlay and overlay, the control and data plane, automation, wireless and security, then fabric design: control plane and border design, segmentation, virtual networks, scalability, over the top and fabric wireless, and multicast. You need to explain these components and the trade-offs between them, not deploy a fabric.

Which WAN Design Choices Does 300-420 Expect You to Make?

WAN for Enterprise Networks carries 20 percent of the ENSLD exam. You describe WAN connectivity options, design site-to-site VPN, and design high availability for the enterprise WAN, each across on-premises, hybrid and cloud solutions. Two further objectives describe Cisco SD-WAN architecture and its design considerations. The VPN and resilience objectives are where most WAN decisions are tested.

The connectivity options listed are Layer 2 VPN, MPLS Layer 3 VPN, Metro Ethernet, DWDM, 4G and 5G, and SD-WAN customer edge. The VPN design objective names DMVPN, Layer 2 VPN, MPLS Layer 3 VPN, IPsec, GRE and GET VPN. These overlap on purpose: a question may hand you a provider service and ask which overlay belongs on top of it, or ask which VPN type suits a full mesh of branches that all need to reach one another.

Resilience is framed by four words: single-homed, multihomed, backup connectivity and failover. Map each to a site profile you know, such as a small branch on one circuit with cellular backup, or a regional hub on two carriers, because the exam asks which design meets a stated availability requirement at the lowest complexity.

For SD-WAN, the architecture objective covers the orchestration, management, control and data planes, onboarding and provisioning, and security. The design considerations objective adds control plane and overlay design, LAN design, high availability, redundancy, scalability, security design, and QoS and multicast over the fabric. If you passed ENSDWI, this domain will feel familiar, but here the question is why a design choice is right, not how to configure it.

What Do QoS, Management and Multicast Look Like as Design Questions?

Network Services is the second 20 percent domain on the ENSLD exam, with five objectives. You select QoS strategies to meet customer requirements, design end-to-end QoS policies, design network management techniques, describe multicast routing concepts, and design multicast services. Four of the five are decision objectives, so this domain is about policy choices more than protocol detail.

QoS

Strategy selection is framed as DiffServ against IntServ. The end-to-end policy objective lists classification and marking, shaping, policing and queuing. A typical design problem gives you an application mix and a link speed and asks where marking should happen, where traffic should be shaped rather than policed, and which queues the voice and video classes need.

Network management

The management objective names in-band against out-of-band management, segmented management networks and prioritising management traffic. It is short, but it is a design objective, so expect a scenario in which you must keep the network reachable for operators while the production path is congested or down.

Multicast

The concepts objective covers source trees, shared trees, reverse path forwarding and rendezvous points. The services objective asks you to design with SSM, PIM bidirectional, MSDP and service reflection. The protocol behind most of it is defined in RFC 7761 for PIM-SM, which is worth reading for the shared tree to source tree switchover, because rendezvous point placement questions depend on understanding it.

Is There Really AI in the ENSLD Automation Domain?

The final ENSLD domain is listed on the NWExam syllabus page as Automation and Artificial Intelligence at 10 percent, while Cisco’s downloadable 2023 exam topics PDF names the same domain Automation. Both versions list the same six objectives, and none of them names an AI technology. In practice, the domain tests model-driven programmability, telemetry and cloud connectivity, whatever its title.

The six objectives are: differentiate between IETF, OpenConfig and Cisco YANG models; differentiate between NETCONF and RESTCONF; describe the impact of model-driven telemetry, with periodic and on-change publication; describe gRPC and gNMI; describe cloud connectivity options such as direct connect, cloud on ramp, MPLS direct connect and WAN integration; and describe the cloud services model in private, public and hybrid deployments. For the RESTCONF side, RFC 8040 on RESTCONF sets out how it maps YANG data onto HTTP methods, which is most of what the differentiation objective needs.

Three items the 2023 PDF does not list

Comparing the two documents line by line shows three more differences besides the domain name. The syllabus page adds confederations next to route reflectors in the BGP objective, NSF and NSR next to graceful restart in campus high availability, and service reflection in the multicast services objective. Cisco’s live topics page on the Learning Network could not be read for this article, so it is not possible to say which wording it shows today. The safe approach is to study the longer list: the extra items are standard design topics either way.

What Does Passing 300-420 Earn You?

Passing 300-420 ENSLD earns the Cisco Certified Specialist – Enterprise Design credential on its own, and it also meets the concentration exam requirement for CCNP Enterprise, which needs the 350-401 ENCOR core exam as well. The certification is valid for three years, and a pass can also count toward recertification of an existing Cisco certification.

The ENSLD exam page on cisco.com lists both credentials, the English and Japanese delivery options, and the option to pay with Cisco Learning Credits. The official course also earns 40 Continuing Education credits toward recertification, according to Cisco’s training overview, so the course itself has value at renewal time even for someone who has already passed.

The choice of concentration matters for CCNP Enterprise. ENSLD suits engineers moving into design or architecture roles, or presales engineers who produce high-level designs, because the Specialist title names the design skill directly. Engineers whose work is implementing and running advanced routing may find 300-410 ENARSI, Implementing Cisco Enterprise Advanced Routing and Services, a closer match. For a longer resource list on this exam, the earlier 300-420 ENSLD study guide on this site groups reading material by domain.

How Should You Prepare for a Design Exam?

Preparing for the ENSLD exam means practising decisions, not commands. Cisco recommends knowledge from CCNA and ENCOR training before the course, so routing and campus fundamentals should already be solid. From there, work each domain as a set of requirements and trade-offs, write down why you would choose one option over another, and test yourself against scenarios rather than definitions.

Five step study order for the ENSLD design exam from sorting objectives to timed practice

A working order that follows the weightings and the verb split:

  1. Download the topic list and mark each of the 27 objectives as either a decision objective or a describe objective.
  2. Start with addressing and routing, and for each protocol write one design you would defend and one you would reject.
  3. Move to campus design and draw the Layer 2 and Layer 3 boundary for three different building sizes.
  4. Work through WAN and VPN choices by matching each connectivity option to a site profile and an availability target.
  5. Build QoS and multicast policies on paper for a stated application mix and link speed.
  6. Finish with SD-Access, SD-WAN and the automation domain, which are tested mostly by description.
  7. Sit timed practice questions and review every wrong answer by asking which requirement you missed.

Time matters once you reach the last step. With 55 to 65 questions in 90 minutes you have well under two minutes per item, and design scenarios take longer to read than fact questions. If you are still deciding which concentration to take after ENCOR, the CCNP Enterprise path guide compares the options side by side.

Use the official topics list as your checklist throughout. Cisco’s 2023 ENSLD topics PDF is the version you can download, and the three extra items described above are worth adding to it by hand.

Frequently Asked Questions

What is the ENSLD exam?

ENSLD is Cisco exam 300-420, Designing Cisco Enterprise Networks. It tests enterprise network design across addressing and routing, campus, WAN, network services and automation, and it is one of the concentration exams for CCNP Enterprise.

How many questions are on the 300-420 ENSLD exam?

The NWExam syllabus page lists 55 to 65 questions in 90 minutes. Cisco’s exam page confirms the 90 minutes but does not display a question count.

What is the passing score for ENSLD?

The syllabus page gives a variable passing score of approximately 750 to 850 out of 1000. Cisco does not display a passing score on the exam page.

How much does the ENSLD exam cost?

The exam costs $300 USD, and Cisco also accepts Cisco Learning Credits. You register and sit it through Pearson VUE.

Is there an ENSLD v2.0 exam?

No version 2.0 exam is published. Cisco’s current training overview describes the exam as 300-420 ENSLD v1.1, and the syllabus page describes the same v1.1 exam. The 2.0 label appears on the recommended training course, not on the exam.

Does the ENSLD Automation domain test AI?

The syllabus page titles the domain Automation and Artificial Intelligence, but its six objectives cover YANG models, NETCONF and RESTCONF, model-driven telemetry, gRPC and gNMI, cloud connectivity and cloud service models. None of them names an AI technology.

Should I take ENSLD or ENARSI for CCNP Enterprise?

Both meet the concentration requirement. ENSLD tests design decisions across the enterprise network, while 300-410 ENARSI covers implementing Cisco enterprise advanced routing and services. Choose the one closer to the work you do or want to do.

Do I need ENCOR before taking ENSLD?

No. You can pass ENSLD on its own and earn the Cisco Certified Specialist – Enterprise Design credential. To hold CCNP Enterprise you need both the 350-401 ENCOR core exam and a concentration such as ENSLD.

How long is the ENSLD certification valid?

The certification is valid for three years. You can renew it through Continuing Education credits or by passing qualifying exams, and the official ENSLD course itself earns 40 CE credits.

Conclusion

The ENSLD exam is easiest to understand through its verbs. Fifteen of its 27 objectives ask you to create, design, determine or select, and those decision objectives sit mainly in routing, campus, VPN, WAN resilience, QoS and multicast. SD-Access, SD-WAN and the automation domain are tested mostly by description. The exam runs 90 minutes with 55 to 65 questions at $300, earns the Enterprise Design Specialist credential, and completes CCNP Enterprise alongside ENCOR. Study from the longer syllabus list, practise writing designs you can defend, and finish with timed scenarios. If you work as a network engineer who is moving toward design or architecture, 300-420 is the concentration that names that skill directly.

Rating: 0 / 5 (0 votes)

The post ENSLD Exam: How 300-420 Tests Design Choices, Not Commands appeared first on CiscoPrep.

]]>
Study Guide: Cisco 300-420 ENSLD Exam https://www.ciscoprep.com/2023/12/20/how-to-pass-cisco-300-420-ensld-exam/ Wed, 20 Dec 2023 12:15:42 +0000 https://www.ciscoprep.com/?p=1374 The study resources for Cisco 300-420 ENSLD exam are Official Cisco training, ENSLD training videos, official cert guide, and practice test

The post Study Guide: Cisco 300-420 ENSLD Exam appeared first on CiscoPrep.

]]>
The Cisco CCNP 300-420 ENSLD exam, commonly called the Designing Cisco Networks exam, is a vital component for obtaining a CCNP Enterprise certification. This particular exam is designed for network administrators with an advanced level of experience, ranging from three to five years, in the field of network design. For the current blueprint, see how the 300-420 ENSLD exam tests design choices rather than commands.

Successfully passing the exam validates the ability to establish and oversee a company’s network’s performance and security aspects. Individuals who succeed in this exam demonstrate their proficiency in designing the required equipment, software, and connections essential for effectively implementing a network.

All You Need to Know about Cisco 300-420 ENSLD Exam

The content covered in the Cisco 300-420 exam revolves around the principles associated with the design of Cisco Enterprise networks. Over a 90-minute duration, your knowledge and skills will be assessed in the following domains:

  • Advanced Addressing and Routing Solutions (25%)
  • Advanced Enterprise Campus Networks (25%)
  • WAN for Enterprise Networks (20%)
  • Network Services (20%)
  • Automation (10%)

Besides serving as a concentration examination for the CCNP Enterprise certification, completing this exam also grants you the Cisco Certified Specialist — Enterprise Design designation. Opting not to pursue CCNP Enterprise would still be worthwhile, given the benefits of this additional credential. However, let’s shift focus to more pressing concerns, such as preparing for the 300-420 ENSLD test.

Cisco 300-420 ENSLD: Exam Preparation

Having familiarized yourself with the specifics of the Cisco 300-420 ENSLD exam, the subsequent action is to acquire some effective tips for successfully navigating it. Here are the recommended steps for you to follow:

1. Craft a Schedule That Suits Your Preparation Process

Establishing a well-structured schedule is vital to positioning yourself for success in the 300-420 ENSLD exam. This schedule should encompass the time available before the test, a breakdown of topics to be covered and when to cover them, and a projected completion date for your studies. Commencing your learning sufficiently in advance is crucial to addressing all objectives and conducting comprehensive reviews thoroughly. Failure to initiate early preparations may result in time constraints, ultimately leading to a lower score due to an inability to study all the necessary materials promptly.

2. Utilize Top-Notch Preparation Resources for Your Study Sessions

Thorough coverage of the Cisco 300-420 ENSLD exam subjects is essential. To comprehend the exam topics effectively, it is crucial to concentrate on preparatory resources that enable you to optimize your advantages. These study resources encompass:

  • Official Cisco training
  • ENSLD training videos
  • CCNP Enterprise Design ENSLD 300-420 Official Cert Guide Premium Edition and Practice Test

3. Take Notes as You Engage in Your Study Sessions

To retain a specific concept in your memory for an extended period, it’s essential to document it. Whether you choose to write notes by hand or use applications like Evernote, BoostNote, or Microsoft OneNote, note-taking contributes to better memorization of concepts. These notes serve as a reference for future review. Additionally, note-taking lets you record areas of difficulty, allowing you to revisit and enhance your understanding later.

4. Take Cisco 300-420 ENSLD Practice Tests

If you seek an experience similar to the actual exam, consider engaging in practice tests. This allows you to acquaint yourself with the exam-passing procedures beforehand. Furthermore, it provides insight into the test format and how to approach it. Cisco 300-420 practice tests serve the dual purpose of refining the skills necessary for the exam and assessing your level of preparedness.

5. Utilize Forums and Collaborate With Peers to Enhance Your Learning

Indeed, one of the most effective learning methods involves seeking assistance and advice from seasoned professionals, which can be done by connecting with them through different online professional communities. Collaborating with a study group or partner proves to be an efficient approach to exam preparation. This enables sharing knowledge, posing questions, and maintaining mutual motivation.

Importance of Cisco 300-420 ENSLD Practice Test

1. Understand Cisco 300-420 ENSLD Exam pattern

Taking practice tests will acquaint you with the examination format of the Cisco 300-420 exam. Familiarizing yourself with details such as the number of questions, time limits, and other aspects of the exam pattern is crucial. A thorough understanding of the exam pattern can prevent complications and ensure a smoother experience when undertaking the actual test.

2. Enhances Time Management Skills

Effective time management is arguably the most crucial factor to bear in mind during any examination. Finishing a set of questions within a specified timeframe is essential. Engaging in Cisco 300-420 practice tests is among the most effective methods to enhance your time management skills. You can assess the amount of time allocated for each question through multiple practice tests.

3. Practice Test Help in Pinpointing Areas of Strength and Weakness

Engaging in practice tests enables you to discern your strengths and weaknesses. You’ll identify the sections you can effortlessly tackle and those that pose more difficulty. Subsequently, it is essential to dedicate extra effort and time to improve in the areas where you are weaker. During the Cisco 300-420 ENSLD exam, leverage your strengths by first addressing the more straightforward questions, allowing more time for the challenging ones.

4. Motivation

Despite thorough preparation, specific candidates may experience anxiety when approaching the actual exam. Taking Cisco 300-420 ENSLD practice tests alleviates this anxiety, instilling motivation for the exam. This practice helps enhance your confidence by simulating the exam environment while allowing you to remain in a comfortable setting.

Conclusion

These approaches for preparing for the Cisco 300-420 ENSLD exam are effective, but you must follow and implement them to ensure their success actively. Pay attention to the necessary steps for passing this assessment on your initial attempt, which includes making the most of practice tests—a widely favored and prosperous technique by many candidates. By consistently engaging in thorough revision, you can always attain optimal results. Embrace these preparation tips and realize your aspiration by achieving the CCNP Enterprise 300-420 certification.

Rating: 5 / 5 (38 votes)

The post Study Guide: Cisco 300-420 ENSLD Exam appeared first on CiscoPrep.

]]>
Is Cisco 300-420 ENSLD Certification Worth It? Spoiler: Yes https://www.ciscoprep.com/2022/07/01/is-cisco-300-420-ensld-certification-worth-it-spoiler-yes/ Fri, 01 Jul 2022 12:41:00 +0000 https://www.ciscoprep.com/?p=316 passing Cisco 300-420 ENSLD exam and earning its associated certifications will give you an incredible advantage over many IT professionals

The post Is Cisco 300-420 ENSLD Certification Worth It? Spoiler: Yes appeared first on CiscoPrep.

]]>
As businesses try to simplify their operations and data gathering, the market for IT networking professionals also increases. One of the fastest ways to enter this field and expand your career is by earning appropriate certifications. Cisco is one of the world’s most prestigious providers of networking certifications. This is because of the diverse technologies and solutions that they provide, which, consecutively, require qualified professionals to execute them. Cisco’s most popular high-level certification is the CCNP Enterprise 300-420 ENSLD, which confirms your basic and detailed skills in this area. Read this blog to know more about this badge, its 300-420 ENSLD exam, resources to prepare for it, and the benefits it draws.

Cisco 300-420 ENSLD Exam Structure and Syllabus Topics

If you want to earn the CCNP Enterprise certification, it is essential that you take the Cisco 300-420 ENSLD exam acutely. To pass this exam, you have to work hard, so be prepared for it. You should know all the vital information about this CCNP Enterprise concentration exam, and to start with, the exam comprises 55-65 questions that need to be completed within 90 minutes. The exam-takers are evaluated on the following topics:

  • Advanced addressing as well as routing solutions;
  • Advanced campus networks for enterprise;
  • WAN targeting enterprise networks;
  • Network-based services;
  • Automation.

This exam costs $300 and is available in two languages, English and Japanese. To know more about the exam in detail, visit the official webpage.

Best Resources For Cicso 300-420 ENSLD Exam Preparation

The best resource for Cicso 300-420 exam preparation is the official training course – Designing Cisco Enterprise Networks (ENSLD) v1.1. It allows the applicants to master the Cisco 300-420 exam topics.

The time period for the course depends on the platform you prefer to study with. You can prepare for the exam through e-learning and Instructor-led training course.

Additionally, you can also get the training in a formal classroom with the case studies created particularly for you. You can opt for the paid course that will last for five days.

Furthermore, you can also buy study guides from cisco press and Amazon that includes a detailed explanation of exam concepts and practice questions for better exam prep.

Exam-takers should also look for the Cisco 300-420 ENSLD practice tests offered by a reliable and trusted platform.

Is Cisco 300-420 ENSLD Certification Worth It?

Beyond the evidence of knowledge, Cisco 300-420 ENSLD exam is capable of eventually putting you up for excellent career opportunities and benefits. And by all means, these entail a promising job and salary hike in your chosen field.

1. Better Job Prospects

By passing the Cisco 300-420 ENSLD certification exam, you will undoubtedly relish an extended array of job opportunities within the IT world. Certainly, several high-paying job positions will wait for you since you must have been certified as a professional in the multiple facets of enterprise design. To be more definite, passing the Cisco 300-420 ENSLD exam and achieving the related Cisco Certified Specialist – Enterprise Design certification can make you qualified for the following job profiles:

  • Network Security Engineer
  • Network Architect
  • Network Administrator
  • Network Engineer
  • Network Design Engineer
  • Wireless Design Engineer
  • and Network Manager, among others.

2. Higher Salary

The outcome of getting better job opportunities is higher salary prospects. Moreover, as the 300-420 exam falls into the CCNP Enterprise certification track, you will be pleased to know that a Cisco Certified Network Professional, according to ZipRecruiter.com, is competent to make a salary of about $107k per year, most especially on the basis of your level of skills, experience, and other concerning aspects. Simultaneously, as also found via the PayScale website, a company like Amazon Inc. will pay CCNP-certified professionals within the range of $77k – $201k.

3. Paves the Way for Higher-Level Certifications

If you are looking to take your career growth a few steps further, passing the 300-420 ENSLD exam and achieving the concerned Cisco certifications will be an excellent launch pad for you to receive even more. As a Cisco CCNP Enterprise certification holder, you will have a superb background to join expert-level certification pathways, namely the CCIE Enterprise Wireless and the CCIE Enterprise Infrastructure.

Intending to Take Cisco 300-420 ENSLD Exam? Click Here.

Conclusion

On the whole, you must have noted that succeeding in the Cisco 300-420 ENSLD certification exam is a significant way to enjoy plentiful opportunities in your career journey. Either relating to instant benefits or as a matter of future ones, passing the coveted Cisco 300-420 exam and earning its associated certifications will give you an incredible advantage over the many IT professionals in the enterprise design field. This way, you can demonstrate yourself as a skilled professional knowledgable with all the contemporary trends and particulars of the industry, excel in front of the eyes of the present and future employers, and get one step closer to your career goal. Go for it!

Rating: 0 / 5 (0 votes)

The post Is Cisco 300-420 ENSLD Certification Worth It? Spoiler: Yes appeared first on CiscoPrep.

]]>